• OpenAccess
  • Synthesis, Characterization and Performance Evaluation of an Advanced Solid Electrolyte and Air Cathode for Rechargeable Lithium-Air Batteries  [PMS 2016]
  • DOI: 10.4236/msce.2016.41012   PP.74 - 89
  • Author(s)
  • Susanta K. Das, Jianfang Chai, Salma Rahman, Abhijit Sarkar
  • Synthesis and characterization of a tri-layered solid electrolyte and oxygen permeable solid air cathode for lithium-air battery cells were carried out in this investigation. Detailed fabrication procedures for solid electrolyte, air cathode and real-world lithium-air battery cell are described. Materials characterizations were performed through FTIR and TGA measurement. Based on the experimental four-probe conductivity measurement, it was found that the tri-layered solid electrolyte has a very high conductivity at room temperature, 23C, and it can be reached up to 6 times higher at 100C. Fabrication of real-world lithium-air button cells was performed using the synthesized tri-layered solid electrolyte, an oxygen permeable air cathode, and a metallic lithium anode. The lithium-air button cells were tested under dry air with 0.1 mA - 0.2 mA discharge/ charge current at elevated temperatures. Experimental results showed that the lithium-air cell performance is very sensitive to the oxygen concentration in the air cathode. The experimental results also revealed that the cell resistance was very large at room temperature but decreased rapidly with increasing temperatures. It was found that the cell resistance was the prime cause to show any significant discharge capacity at room temperature. Experimental results suggested that the lack of robust interfacial contact among solid electrolyte, air cathode and lithium metal anode were the primary factors for the cell’s high internal resistances. It was also found that once the cell internal resistance issues were resolved, the discharge curve of the battery cell was much smoother and the cell was able to discharge at above 2.0 V for up to 40 hours. It indicated that in order to have better performing lithium-air battery cell, interfacial contact resistances issue must have to be resolved very efficiently.

  • Lithium-Air, Solid Electrolyte, Air Cathode, Button Cell, Metallic Lithium
  • References
  • [1]
    USCAR—United States Council for Automotive Research LLC.
    Linden, D. and Reddy, T.B. (2002) Handbook of Batteries. McGraw Hill, New York, 41-45.
    Scrosati, B., Hassoun, J. and Sun, Y.-K. (2011) Lithium Ion Batteries. A Look into the Future. Journal of Energy and Environmental Science, 4, 3287-3295.
    Anderman, M. (2011) PHEV and EV Battery Technology Status and Vehicle and Battery Market Outlook. AABC Europe.
    Whittingham, M.S. (2004) Lithium Batteries and Cathode Materials. Journal of Chemistry Review, 104, 4271-4301.
    Pistoia, G. (2005) Batteries for Portable Devices. Elsevier, Lon-don.
    Zhang, J.-G., Wang, D., Xu, W., Xiao, J. and Williford, R.E. (2010) Ambient Operation of Li/Air Batteries. Journal of Power Sources, 195, 4332-4337.
    Zheng, J.P., Liang, R.Y., Hendrickson, M. and Plichta, E.J. (2008) Theoretical Energy Density of Li-Air Batteries. Journal of Electro-chemical Society, 155, A432-A437.
    Wang, D., Xiao, J., Xu, W. and Zhang, J.-G. (2010) High Capacity Pouch Type Li-Air Batteries. Journal of Electrochemical Society, 157, A760-A764.
    Girishkumar, G., McCloskey, B., Luntz, A. C., Swanson, S. and Wilcke, W. (2010) Lithium-air battery: promise and challenges, Journal of Physical Chemistry Letters, 1, 2193–2203.
    Jung, H.G., Hassoun, J., Park, J.B., Yang-Kook Sun, Y.K. and Scrosati, B. (2012) An Improved High-Performance Lithium-Air Battery. Nature Chemistry, 40, 579-585.
    Beattie, S.D., Manolescu, D. M. and Blair, S.L. (2009) High Capacity Li-thium-Air Cathodes. Journal of Electrochemical Society, 156, A44-A47.
    McCloskey, B.D., Bethune, D.S., Shelby, R.M., Girishkumar, G. and Luntz, A.C. (2011) Solvents’ Critical Role in Nonaqueous Lithium-Oxygen Battery Electrochemistry. Journal of Physical Chemistry Letter, 2, 1161.
    Zhang, T. and Zhou, H. (2013) A Reversible Long-Life Lithium-Air Battery in Ambient Air. Nature Communications, 4, 1817.
    Elia, G.A. and Hassoun, J. (2015) A Polymer Lithium-Oxygen Battery, Scientific Reports, 5, 12307.
    Li, F., Kitaura, H. and Zhou, H. (2013) The Pursuit of Rechargeable Sol-id-State Li-Air Batteries. Journal of Energy and Environmental Science, 6, 2302.
    Balaish, M., Peled, E., Golodnitsky, D. and Ein-Eli, Y. (2015) Liquid-Free Lithium-Oxygen Batteries. Angewandte Chemie International Edition, 54, 436.
    Jung, K.N., Lee, J.I., Jung, J.H., Shin, K.H. and Lee, J.W. (2014) A Quasi-Solid-State Rechargeable Lithium-Oxygen Battery Based on a Gel Polymer Electrolyte with an Ionic Liquid. Chemical Communications, 50, 5458.
    Wang, X., Zhu, D., Song, M., Cai, S., Zhang, L. and Chen, Y. (2014) A Li-O2/Air Battery Using an Inorganic Solid-State Air Cathode. ACS Applied Materials and Interfaces, 6, 11204.
    Nadège Bonnet-Mercier, N., Raymond A. Wong, R. A., Morgan L. Thomas, M.L., Arghya Dutta, A., Keisuke Yamanaka, K., Chihiro Yogi, C., Toshiaki Ohta, T. and Hye Ryung Byon, H.R. (2014) A Structured Three-Dimensional Polymer Electrolyte with Enlarged Active Reaction Zone for Li-O2 Batteries. Scientific Reports, 4, 7127.
    Shin, J.-H., Henderson, W.A. and Passerini, S. (2005) PEO-Based Polymer Electrolytes with Ionic Liquids and Their Use in Lithium Metal-Polymer Electrolyte Batteries. Journal of The Electro-chemical Society, 152, A978.
    Appetecchi1, G.B., Crocel, F., Hassounl, J., Salomon, M. and Scrosati1, B. (2003) Hot-Pressed, Dry, Composite, PEO-Based Electrolyte Membranes: I. Ionic Conductivity Characterization. Journal of Power Sources, 114, 105.
    Aetukuri, N.B., McCloskey, B.D., García, J.M., Krupp, L.E., Viswanathan, V. and Luntz, A. C. (2015) Solvating Additives Drive Solution-Mediated Electrochemistry and Enhance Toroid Growth in Non-Aqueous Li-O2 Batteries. Nature Chemistry, 7, 50.
    Black, R., Oh, S.H., Lee, J.H., Yim, T., Adams, B. and Nazar, L.F. (2012) Screening for Superoxide Reactivity in Li-O2 Batteries: Effect on Li2O2/LiOH Crystallization. Journal of American Chemical Society, 134, 2902-2905.

Engineering Information Institute is the member of/source content provider to